banner_page

NCP45540IMNTWG-L

3.3/5V N-Channel 0.5mm PMIC ecoSWITCH? Series 3.3V 12-VFDFN Exposed Pad


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP45540IMNTWG-L
  • Package: 12-VFDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 479
  • Description: 3.3/5V N-Channel 0.5mm PMIC ecoSWITCH? Series 3.3V 12-VFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 12-VFDFN Exposed Pad
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2015
Series ecoSWITCH™
JESD-609 Code e3
Feature Power Good, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 12
Terminal Finish Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 3.24W
Terminal Position DUAL
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Number of Outputs 1
Output Type N-Channel
Max Output Current 20A
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3/5V
Supply Voltage-Min (Vsup) 3V
Number of Channels 1
Interface On/Off
Analog IC - Other Type SPST
Nominal Supply Current 750μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) 3V~5.5V
Input Type Non-Inverting
Switch Type General Purpose
Supply Current-Max (Isup) 0.75mA
Ratio - Input:Output 1:1
Voltage - Load 0.5V~13.5V
On-State Resistance (Max) 0.0077Ohm
Fault Protection Over Temperature, UVLO
Rds On (Typ) 4.8m Ω
Length 3mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NCP45540IMNTWG-L Overview


The LED driver's packaged as a Tape & Reel (TR).The 12-VFDFN Exposed Pad package contains it.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.A voltage of 3V~5.5V is used to power it.A maximum voltage of N-Channel volts is available from the output of this LED driver.Features of the lighting driver are Power Good, Slew Rate Controlled.It contains 12 terminations.Currently, the lighting driver has a total of 1 functions.Maximum output current falls to 20A when operation criteria are met.A supply voltage of 3.3V leads to high efficiency.The LED driving board is mounted in the way of Surface Mount.This electrical component is part of the ecoSWITCH? series.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).The supply voltage (Vsup) should be kept above 3V for normal operation.There is an analog input IC in this gadget, which is SPST.We offer 1 channels in total.This part has a power supply of 3.3/5V.Operation requires 0.75mA supply current.

NCP45540IMNTWG-L Features


Supplied from 3.3V
1 channels

NCP45540IMNTWG-L Applications


There are a lot of ON Semiconductor NCP45540IMNTWG-L Power Switches ICs applications.

  • PDAs
  • Set-Top Boxes
  • Hot Swap
  • Handheld Devices
  • USB Protection
  • Gaming
  • Wireless Headsets
  • Portable Music Players
  • Portable GPS
  • Hard Disk Drives

Write a review

Note: HTML is not translated!
    Bad           Good