NCP45560IMNTWG-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | ecoSWITCH™ |
| JESD-609 Code | e3 |
| Feature | Power Good, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 3.2mOhm |
| Terminal Finish | Tin (Sn) |
| Power Rating | 3.49W |
| Max Power Dissipation | 3.49W |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 24A |
| Operating Supply Voltage | 3.3V |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Max Supply Current | 24A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 265 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 800 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.5V~13.5V |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 3.2m Ω |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP45560IMNTWG-H Overview
It is package in Tape & Reel (TR) case.There is a package for it in the 12-VFDFN Exposed Pad package.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.As a default, the output is set to 1.Operation is based on 3V~5.5V supply voltage.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Power Good, Slew Rate Controlled.It is necessary to use the 12 pins in order to operate the LED driver.To comply with the operation criteria, the maximum output current is reduced to 24A.It is mounted in the way of Surface Mount.As a result, it has a total of 12 pins.It has 3.2mOhm resistance.It is part of the ecoSWITCH? series.It uses an analog IC, which is SPST.When using this LED driving board, it is recommended that the supply voltage is set to 3.3V.The maximum current required for its operation is 24A.
NCP45560IMNTWG-H Features
Resistance of 3.2mOhm
NCP45560IMNTWG-H Applications
There are a lot of ON Semiconductor NCP45560IMNTWG-H Power Switches ICs applications.
- Solid-State Drives
- Wireless Modem Data Cards
- Low Voltage I/O System Power
- Wireless/Networking Cards
- Hot-Swap Systems
- PDAs
- Portable Devices
- Portable Video Game Players
- Hot Swap
- Telecom and Network Systems
