NCP45560IMNTWG-L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | ecoSWITCH™ |
| JESD-609 Code | e3 |
| Feature | Power Good, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 3.2mOhm |
| Terminal Finish | Tin (Sn) |
| Power Rating | 3.49W |
| Max Power Dissipation | 3.49W |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 24A |
| Operating Supply Voltage | 3.3V |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Turn On Delay Time | 265 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 800 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.5V~13.5V |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 3.2m Ω |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP45560IMNTWG-L Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 12-VFDFN Exposed Pad package, it is included.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.By default, it is set to output 1.A voltage of 3V~5.5V is used to power it.The maximum output voltage of this LED driver is N-Channel volts.It is equipped with Power Good, Slew Rate Controlled features.The 12 pins are used for the operation of the system.The maximum output current must drop to 24A to meet the operation criteria.It is positioned in the direction of Surface Mount.There are 12 pins in total on this board.In this case, there is 3.2mOhm resistance in the LED driving board.It belongs to the ecoSWITCH? series.The analog IC used in this lighting driver is SPST.When using this LED driving board, it is recommended that the supply voltage is set to 3.3V.
NCP45560IMNTWG-L Features
Resistance of 3.2mOhm
NCP45560IMNTWG-L Applications
There are a lot of ON Semiconductor NCP45560IMNTWG-L Power Switches ICs applications.
- Portable GPS Device
- Portable Music Players
- Portable GPS
- Hot Swaps
- USB Ports/Hubs
- Wearable Devices
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- HDD, SSD
- PC Cards
