NCP456RFCCT2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 24mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 200mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 0.75/5.5V |
| Supply Voltage-Min (Vsup) | 0.75V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15.7 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.75V~5.5V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 24m Ω |
| Built-in Protections | TRANSIENT |
| Width | 0.85mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP456RFCCT2G Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the 6-UFBGA, WLCSP package.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.A total of 6 terminations have been recorded.For operation, 6 pins are used.As far as functions are concerned, the lighting driver has 1.This results in the maximum output current dropping to 2A to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.The lighting driver is mounted in the direction of Surface Mount.It has a resistance of 24mOhm.When this is the case, the output current is set to 2A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).The supply voltage (Vsup) should be kept above 0.75V for normal operation.In this part, the power supply is set to 0.75/5.5V.
NCP456RFCCT2G Features
Supplied from 3.3V
Resistance of 24mOhm
NCP456RFCCT2G Applications
There are a lot of ON Semiconductor NCP456RFCCT2G Power Switches ICs applications.
- USB Ports/Hubs
- Portable/Handheld Devices
- Portable GPS Device
- Telecom and Network Systems
- Various applications equipped with buttons
- Set-Top Boxes
- USB Protection
- USB Power Distribution
- Portable GPS
- HDD and SSD
