NCP5006SNT1G
| Parameters | |
|---|---|
| Base Part Number | NCP5006 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Interface | Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 160mW |
| Output Current | 50mA |
| Max Output Voltage | 24V |
| Voltage - Output | 24V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 50mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 160mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
NCP5006SNT1G Overview
As a result of its SOT-23-5 Thin, TSOT-23-5 package, it helps to save board space on the board. 1 outputs are designed into LED drivers.It is possible to mount the led driver using Surface Mount.With high efficiency and reliable performance, it emerges as a DC DC Regulator.The led light driver is capable of operating at the operating temperature of -25°C~85°C TA.Backlight has considerable advantages.5 terminations are designed for its operation.A configuration of this chip is made up of 5 pins.A total of 1 segments have been created.Surface Mount is mounted on it.NCP5006 is the base part number for this LED driver.It is acceptable to operate with a supply voltage of 5.5V.The output voltage is 24V.5 pins are available on the device.It is also classified into Display Drivers according to its characteristics.This device requires a minimum input voltage of 2.7V.As a result, it runs at a minimal voltage of 2.7V in order to achieve the best efficiency.5.5V is the maximum value of supply current that can be used.You can supply 50mA current to the load.Ideally, the output voltage should not exceed 24V.
NCP5006SNT1G Features
Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -25°C~85°C TA
Supply voltage of 3.6V
NCP5006SNT1G Applications
There are a lot of ON Semiconductor NCP5006SNT1G LED Driver ICs applications.
- Architectural lighting
- Gallery lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Industrial LED Lighting: Image Recognition Devices
- High-end retail lighting
- Auxiliary lights for on-vehicle cameras
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Scanners and Handy Terminals
- Dimmable LED for vehicle interiors
