NCP5007SNT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 160mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Frequency | 1.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5007 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Interface | Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 160mW |
| Output Current | 50mA |
| Max Output Voltage | 24.5V |
| Voltage - Output | 24.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 50mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP5007SNT1G Overview
As a result of its SOT-23-5 Thin, TSOT-23-5 package, it helps to save board space on the board. A LED driver with 1 outputs is designed.For mounting, it uses the Surface Mount method.In this case, the result is a DC DC Regulator with high efficiency.The led light driver operates normally at -25°C~85°C TA. There are considerable benefits for Backlight.A frequency of 1.2MHz is used to operate it.In this case, there are 5 terminations.There are 5 pins on the base of this LED driver.There are estimated to be 1 segments.Surface Mount is mounted on it.It is under the base part number NCP5007 that the LED driver can be found.As a maximum value, 5.5V is acceptable.The device has a voltage output of 24.5V volts.A total of 5 pins are present on this device.In addition, it can also be categorized into Display Drivers based on its characteristics.A minimal input voltage of 2.7V is required for it to operate.It works with the minimal supply voltage of 2.7V to meet highest efficiency standards.Currently, the supply current can only reach 5.5V.A load can be supplied with 50mA current.Voltages above 24.5V should not be allowed.
NCP5007SNT1G Features
Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -25°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
NCP5007SNT1G Applications
There are a lot of ON Semiconductor NCP5007SNT1G LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Amusement Machines
- Constant Voltage Power Source for portable equipment
- Down lighting
- Other Electronic Devices
- Industrial LED Lighting: Image Recognition Devices
- Sports Facility Lighting
- Flicker-free LED Lighting using R1580N
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- OLED power supply for portable equipment
