NCP5008DMR2
| Parameters | |
|---|---|
| Current - Output / Channel | 75mA |
| Internal Switch(s) | Yes |
| fmax-Min | 5 MHz |
| Number of Segments | 1 |
| Voltage - Supply (Max) | 6V |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 5MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP5008 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Power Dissipation | 200mW |
| Max Supply Current | 3μA |
| Voltage - Output | 15V |
| Topology | Step-Up (Boost) |
NCP5008DMR2 Overview
As a result of its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, it helps to save board space on the board. A LED driver using this design has 1 outputs.Surface Mount is used for mounting.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.LED drivers capable of operating at -25°C~85°C TA can be used.The benefits it provides to Backlight are considerable.Frequency 5MHz is the basis of operation.For its operation, 10 terminations are designed.Having a voltage supply below 2.7V can lead to undetermined failures.In total, it includes 1 segments.It is mounted in the way of Surface Mount.The base part number for this LED driver is NCP5008.The output voltage is 15V.On it, there are 10 pins.It is designed to support a maximum value of 6V.In order to maintain maximum efficiency, the supply current cannot exceed 3μA.
NCP5008DMR2 Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -25°C~85°C TA
Frequency of 5MHz
Supply voltage of 3.6V
NCP5008DMR2 Applications
There are a lot of ON Semiconductor NCP5008DMR2 LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED headlights
- Constant Voltage Power Source for portable equipment
- Scanners and Handy Terminals
- Down lights
- Stage and Studio lighting
- Gallery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Auxiliary lights for on-vehicle cameras
- Linear fluorescent
