NCP5010FCT1G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-UFBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | DC DC Regulator |
| Terminal Finish | MATTE TIN |
| Applications | Backlight |
| Additional Feature | CAN BE CONFIGURED IN CURRENT MODE |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | S-PBGA-B8 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Input Voltage-Nom | 3.6V |
| Input Voltage (Min) | 2.7V |
| Topology | Step-Up (Boost) |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 0.56A |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 560mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.66mm |
| RoHS Status | ROHS3 Compliant |
NCP5010FCT1G Overview
As a result of its 8-UFBGA, FCBGA package, it helps to save board space on the board. This LED driver has 1 outputs.The led light driver is mounted using Surface Mount.It emerges as a DC DC Regulator with high efficiency.It is capable of working normally at -40°C~85°C TA.The benefits are considerable for Backlight.The system operates on the basis of the frequency 1MHz.In this case, it uses 8 terminations.The voltage supply can fail if it is below 2.7V.There are 8 pins on it.It is designed to provide a supply voltage of 5.5V at its maximum.A circuit operated by the device has 3.6V volts.Working with an input voltage higher than or equal to 2.7V brings great convenience to its operation.Additionally, this LED driver is characterized by a CAN BE CONFIGURED IN CURRENT MODE.The input voltage should be kept below 5.5V to ensure high stability.It is important that the output current is not greater than 0.56A.
NCP5010FCT1G Features
Available in the 8-UFBGA, FCBGA package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
CAN BE CONFIGURED IN CURRENT MODE
NCP5010FCT1G Applications
There are a lot of Rochester Electronics, LLC NCP5010FCT1G LED Driver ICs applications.
- White LED Backlight for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
- Stage Lighting and Signage
- Dimmable LED for vehicle interiors
- Portable lighting
- High-end retail lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Down lights
- Replacement lamps
