NCP5010FCT1G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFBGA, FCBGA |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | MATTE TIN |
| Applications | Backlight |
| Additional Feature | CAN BE CONFIGURED IN CURRENT MODE |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5010 |
| Pin Count | 8 |
| JESD-30 Code | S-PBGA-B8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 20V |
| Input Voltage-Nom | 3.6V |
| Output Power | 500mW |
| Input Voltage (Min) | 2.7V |
| Topology | Step-Up (Boost) |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 0.56A |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 560mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog |
| Switching Frequency | 1MHz |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.66mm |
| RoHS Status | RoHS Compliant |
NCP5010FCT1G Overview
As a result of its 8-UFBGA, FCBGA package, it helps to save board space on the board. A LED driver with 1 outputs is designed.The led light driver is mounted using Surface Mount.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.When the temperature is -40°C~85°C TA, it can work normally.Backlight provides many benefits.The terminations 8 are designed for its operation.A voltage supply less than 2.7V could result in undetermined failures.Surface Mount is mounted on it.Under the base part number NCP5010, you will find this LED driver.The device has a pin count of 8.Optimally, it provides a voltage value of 5.5V for the maximum supply voltage.When the switching frequency is maintained at 1MHz, this electronic component is able to fully play its functions.This device has a voltage output of 20V volts.When the device is operated, 3.6V volts are applied to the circuit.Input voltages higher than or equal to 2.7V make its operation much more convenient.Additionally, this LED driver has a CAN BE CONFIGURED IN CURRENT MODE.When the input voltage is kept below 5.5V, high stability can be achieved.It is not recommended to exceed 0.56A in the output current.
NCP5010FCT1G Features
Available in the 8-UFBGA, FCBGA package
Operating temperature of -40°C~85°C TA
Switching frequency of 1MHz
Output voltage of 20V
CAN BE CONFIGURED IN CURRENT MODE
NCP5010FCT1G Applications
There are a lot of ON Semiconductor NCP5010FCT1G LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lightings for Industrial Equipment
- Street lighting
- General lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED headlights
- Flicker-free LED Lighting using R1580N
- LED Lighting PFCs, Linear Dimmable
- Constant Voltage Power Source for portable equipment
- Portable lighting
