NCP5030MTTXG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5030 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 900mA |
| Max Supply Current | 5mA |
| Quiescent Current | 5mA |
| Voltage - Output | 2.2V~5.5V |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Output Current per Channel | 900mA |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Max Junction Temperature (Tj) | 125°C |
| Switching Frequency | 700kHz |
| Voltage - Supply (Min) | 2.7V |
| Ambient Temperature Range High | 85°C |
| Height | 800μm |
| Length | 4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP5030MTTXG Overview
Using its 12-WFDFN Exposed Pad package, it is possible to save board space. In LED drivers, the outputs are all set to 1.As far as mounting is concerned, Surface Mount is adopted.As a DC DC Regulator, it has high efficiency and reliability.LED drivers capable of operating at -40°C~85°C TA can be used.For its operation, terminations with a value of 0 are used.This configuration is built upon 12 pins.Having a voltage supply below 2.7V can lead to undetermined failures.There is a mounting of it by Surface Mount.LED drivers are found under the base part number NCP5030.The voltage of 5.5V can be supplied.In this device, the output voltage is 2.2V~5.5V volts.12 pins are used on the device.To meet high efficiency standards, it works with a voltage of 2.7V.When the supply current should be less than 5mA, the device will provide high efficiency.The current that can be supplied to the load is 900mA.The electronic component can function fully when the switching frequency is maintained at 700kHz.When no external factors are present, there is 5mA current consumption.There are 3.6V volts assigned to the circuit when operating the device.
NCP5030MTTXG Features
Available in the 12-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Switching frequency of 700kHz
NCP5030MTTXG Applications
There are a lot of ON Semiconductor NCP5030MTTXG LED Driver ICs applications.
- Amusement Machines
- LED headlights
- Gallery lighting
- LED Lighting PFCs, Linear Dimmable
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- High-end retail lighting
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Replacement lamps
- Portable lighting
