NCP5104DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | NCP5104 |
| Pin Count | 8 |
| Output Voltage | 700mV |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Propagation Delay | 800 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 800 ns |
| Halogen Free | Halogen Free |
| Rise Time | 160ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 85ns 35ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| Turn Off Time | 0.17 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Output Current Flow Direction | SOURCE SINK |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP5104DR2G Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the form of the package.This configuration includes 2 drivers.Its recommended mounting way is Surface Mount.In the absence of a 10V~20V supply voltage, its superiority can be demonstrated.There is a gate type of IGBT, N-Channel MOSFET in this design.There is a temperature range for this device of -40°C~125°C TJ.Non-Inverting is used as its input type.Its configuration is based on a total of 8 terminations.You will find various related parts under the base part number NCP5104.Devices are mounted by Surface Mount.Devices have 8 pins available.Mosfet driver is designed specifically to run on 15V volts of power.There is a maximum output current of 500mA that can be achieved.Within this subcategory of MOSFET Drivers, there are several useful electronic components.On the board, there are 8 component pins.Ideally, the high-side voltage should not exceed 600V.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.700mV is the output voltage.
NCP5104DR2G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
NCP5104DR2G Applications
There are a lot of ON Semiconductor NCP5104DR2G gate drivers applications.
- Video amplifiers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Active filtering
- DC-DC Converters
- High current laser/LED systems
- Industrial Modules
- Motor controllers
- Isolated Gate Driver Supplies
- Commercial air-conditioning (CAC)
- Automotive Applications
