NCP5106ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 178W |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5106 |
| Pin Count | 8 |
| Output Voltage | 20V |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Nominal Supply Current | 5mA |
| Max Supply Current | 5mA |
| Propagation Delay | 170 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 170 ns |
| Halogen Free | Halogen Free |
| Rise Time | 160ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 85ns 35ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.17 µs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| Turn Off Time | 0.17 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Output Current Flow Direction | SOURCE SINK |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP5106ADR2G Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tape & Reel (TR).2 drivers are incorporated for its configuration.Surface Mount is mounted in the way of the device.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.Mosfet driver accepts input of type Non-Inverting.Initially, the configuration is composed of 8 terminations.There are various related parts under its base part number NCP5106.Mosfet driver is mounted using Surface Mount.During design, it is configured with 8 pins.The device is specifically designed to operate at 15V volts.In the maximum case, the output current can be 500mA volts.There are various useful electronic components in its subcategory MOSFET Drivers.The board has a total of 8 component pins.Maximum (Bootstrap) voltage can be up to 600V.Its maximum power dissipation of 178W shows its power loss capacity without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 5mA.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 15V.In this case, the voltage is 20V.
NCP5106ADR2G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 178W
NCP5106ADR2G Applications
There are a lot of ON Semiconductor NCP5106ADR2G gate drivers applications.
- RGB applications
- Telecom switch mode power supplies
- Motor Control
- Dual-Battery Systems
- Topologies
- DC-DC Converters
- Multicolor LED/laser displays
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Active filtering
- General Purpose 3-Phase Inverter
