NCP5106APG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5106 |
| Pin Count | 8 |
| Output Voltage | 20V |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Nominal Supply Current | 5mA |
| Max Supply Current | 5mA |
| Propagation Delay | 170 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 170 ns |
| Halogen Free | Halogen Free |
| Rise Time | 160ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 85ns 35ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.17 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| Turn Off Time | 0.17 μs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Output Current Flow Direction | SOURCE SINK |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP5106APG Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.A packaging method of Tube is used.Configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Through Hole.WGate driversh a 10V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This gate type has a IGBT, N-Channel MOSFET design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.A type of Non-Inverting is used for input in this program.8 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number NCP5106.The device is mounted using Through Hole.During design, it is configured with 8 pins.In order to operate, a voltage of 15V has to be applied.There is an output current limit of 500mA for this device.Its subcategory of MOSFET Drivers contains various useful electronic components.The board has a total of 8 component pins.There can be a voltage up to 600V on the high-side (Bootstrap).In order to ensure greater stability, it is recommended to keep the supply current at 5mA.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.In this case, it produces a voltage of 20V.
NCP5106APG Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
NCP5106APG Applications
There are a lot of ON Semiconductor NCP5106APG gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Line drivers
- Portable Media Players
- Solar inverters
- 3-Phase Motor Inverter Driver
- Portable computers
- Pulse transformer drivers
- Active filtering
- Smart Phones
- High current laser/LED systems
