NCP5106BPG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | NCP5106 |
| Pin Count | 8 |
| Output Voltage | 20V |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Nominal Supply Current | 5mA |
| Max Supply Current | 5mA |
| Propagation Delay | 170 ns |
| Input Type | Non-Inverting |
| Halogen Free | Halogen Free |
| Rise Time | 160ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 85ns 35ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.17 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| Turn Off Time | 0.17 μs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Output Current Flow Direction | SOURCE SINK |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP5106BPG Overview
Its 8-DIP (0.300, 7.62mm) package provides greater flexibility.A packaging method of Tube is used.2 drivers are incorporated for its configuration.There is a mounting bracket in the way of Through Hole.By using 10V~20V supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.The input type for this program is Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number NCP5106.In this case, Through Hole indicates how the device is to be mounted.At the time of design, it is configured with 8 pins.This device operates with 15V supply voltage.There is an output current limit of 500mA for this device.There are several useful electronic components found in its subcategory of MOSFET Drivers.On the board, there are 8 component pins.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.If you want a stable supply current, you should keep it at 5mA.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.A voltage of 20V is output by this device.
NCP5106BPG Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
NCP5106BPG Applications
There are a lot of ON Semiconductor NCP5106BPG gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- RGB applications
- 3-Phase Motor Inverter Driver
- Line drivers
- Motor Drives
- Motor controllers
- Isolated Gate Driver Supplies
- Isolated switch mode power supplies (SMPS)
- Broadcast equipment
- Industrial Modules
