NCP5111PG
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 18 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5111 |
| Pin Count | 8 |
| Output Voltage | 20V |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Nominal Supply Current | 5mA |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.17 μs |
| Halogen Free | Halogen Free |
| Rise Time | 160ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 170 ns |
| Rise / Fall Time (Typ) | 85ns 35ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| Turn Off Time | 0.17 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Output Current Flow Direction | SOURCE SINK |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
NCP5111PG Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.There is a package in the form of Tube.There are 2 drivers installed for this device.Through Hole is mounted in the way of the device.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 10V~20V.Gate type IGBT, N-Channel MOSFET has been used in its design.Temperature range -40°C~125°C TJ is allowed for this device.The input type for this program is Non-Inverting.The configuration is based on 8 terminations.Numerous related parts are available for its base part number NCP5111.Mounting the device requires Through Hole.The pins are configured with 8 when designing the chip.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.Mosfet driver is possible for the output current to be as low as 500mA.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A total of 8 pins are available for component connections.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.For higher stability, the supply current should be kept at 5mA.Due to its 15V power supply, it can solve power supply problems for an array of diverse applications.In this case, it produces a voltage of 20V.
NCP5111PG Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
NCP5111PG Applications
There are a lot of ON Semiconductor NCP5111PG gate drivers applications.
- Industrial Power Supplies
- Isolated Supplies for Motor Control
- Dual-Battery Systems
- DC-DC Converters
- High frequency line drivers
- Power factor correction (PFC) circuits
- Industrial Motor Inverter - Power Tools, Robotics
- Head-up and Head mounted displays
- High-speed communications
- Uninterruptible Power Supplies (UPS)
