NCP5181DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 178mW |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5181 |
| Pin Count | 8 |
| Output Voltage | 620.3V |
| Max Output Current | 2.2A |
| Power Supplies | 15V |
| Nominal Supply Current | 6.5mA |
| Power Dissipation | 178mW |
| Output Current | 2.2A |
| Max Supply Current | 6.5mA |
| Propagation Delay | 170 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 170 ns |
| Halogen Free | Halogen Free |
| Rise Time | 60ns |
| Differential Output | NO |
| Fall Time (Typ) | 40 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Interface IC Type | LINE DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.4A 2.2A |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP5181DR2G Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Gate drivers is packaged in the way of Tape & Reel (TR).Gate drivers is configured wGate driversh 2 drivers.The device is mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 10V~20V.This gate type has a N-Channel MOSFET design.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.It's configured with 8 terminations.Numerous related parts are available for its base part number NCP5181.Mosfet driver is mounted using the Surface Mount method.As a result, it is configured with 8 pins when it is designed.In order to operate, a voltage of 15V has to be applied.In this case, LINE DRIVER serves as the interface IC.There is an output current limit of 2.2A for this device.There are several useful electronic components found in its subcategory of MOSFET Drivers.There are 8 component pins on the board.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.The output current of this device can be set to 2.2A.Considering its maximum power dissipation, 178mW shows its maximum capacity to transfer and conduct power loss without overheating.Keeping the supply current at 6.5mA ensures greater stability.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.The voltage it outputs is 620.3V.Mosfet gate drivers receives an input of STANDARD.
NCP5181DR2G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 178mW
NCP5181DR2G Applications
There are a lot of ON Semiconductor NCP5181DR2G gate drivers applications.
- Telecom switch mode power supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Gate Driver Supplies
- Digitally controlled power supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Power factor correction (PFC) circuits
- Commercial air-conditioning (CAC)
- Solar power supplies
- Commercial and agricultural vehicles (CAV)
