NCP5212AMNTXG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 3.3V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Pitch | 0.65mm |
| Base Part Number | NCP5212 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Max Output Current | 35μA |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~27V |
| Control Features | Current Limit, Enable, Power Good |
| Max Output Voltage | 3.3V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 27V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Max Frequency | 330kHz |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP5212AMNTXG Overview
It comes in the 16-VQFN Exposed Pad package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). dc controls with 4.5V~27V voltage are supplied and operated. Work well in dc switchers with a -40°C~85°C TA. There is a switch at 300kHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Power Good. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING REGULATOR. The switching converters's terminal (s) are designed at QUAD . The 16 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 12V. Searching "NCP5212" will return other relevant dc to dc converter ics. 16 pins are present on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. The test statistics indicate that DC regulator outputs a voltage of 3.3V. In most cases, the output current of the dc dc regulator will be 5A, so note that when you start the project. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 330kHz on this dc regulators. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 3.3V in order to better satisfy the requirement. Because the dc switcher's maximum input voltage is 27V users must limit the voltage accordingly. In order to use a 4.5V voltage supply, switching controller is necessary to have one. In this case, the dc switcher won't produce more than 35μA watts of output current. The switching converter can output 3.3V volts at its utmost, according to the datasheet. A voltage controller's lowest output voltage cannot be less than 800mV.
NCP5212AMNTXG Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 3.3V
NCP5212AMNTXG Applications
There are a lot of ON Semiconductor NCP5212AMNTXG DC to DC converter applications.
- Gear/thread machining machines
- Large fire protection systems
- Handheld GPS
- Linear guide
- Low output voltage switching power supply circuits
- Surge protection circuits
- Driver circuits
- Adjustable voltage or current linear circuits
- Die casting equipment
- Hydrogen power
