NCP5269MNTWG
| Parameters | |
|---|---|
| Synchronous Rectifier | Yes |
| Min Output Voltage | 200mV |
| Max Frequency | 600kHz |
| Clock Sync | No |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 123.008581mg |
| Operating Temperature | -40°C~100°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Pitch | 0.4mm |
| Base Part Number | NCP5269 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.5V |
| Output Type | Transistor Driver |
| Max Output Current | 2mA |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Control Features | Enable, Frequency Control, Power Good |
| Max Output Voltage | 1.5V |
| Topology | Buck |
| Min Input Voltage | 3.3V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz 400kHz 600kHz |
| Max Input Voltage | 28V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
NCP5269MNTWG Overview
The switching controller fits in the 20-VFQFN Exposed Pad package and is ideal for most applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 4.5V~5.5V. Workable in an dc switcher where -40°C~100°C TA is the -40°C~100°C TArm. Using this switching controller, it is possible to switch at 300kHz 400kHz 600kHz. The Surface Mount makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Power Good. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . 20 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. You can find other relevant dc to dc converter ics by searching "NCP5269". Switching converter has a total of 20 pins. There is a particular type of Switching Regulator or Controllers in switching converter. Test statistics indicate DC regulator outputs 3.5V voltage. It's important to remember that the dc dc regulator's normaloutput current is 2mA, so you should note it down when starting a new project. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator has a maximum frequency of 600kHz. The maximum input voltage of the dc switcher is 28V, so users need to limit the voltage accordingly. The supply voltage must be 3.3V. A dc switcher can only produce an output current of 2mA. Depending on the datasheet, the switching converter can output 1.5V volts at its peak. 200mV voltage output is lower than 200mV.
NCP5269MNTWG Features
Transistor Driver Outputs
Switching Frequency: 300kHz 400kHz 600kHz
Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
NCP5269MNTWG Applications
There are a lot of ON Semiconductor NCP5269MNTWG DC to DC converter applications.
- Grinders
- Smoke prevention equipment
- Precision electronic equipment
- Fire elevators
- Energy management systems
- Hydraulic presses
- Planers
- Geothermal power
- Smart grid
- Machining centers
