NCP5351DR2G
| Parameters | |
|---|---|
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.037 μs |
| High Side Voltage - Max (Bootstrap) | 25V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -30°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~6.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5351 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Propagation Delay | 80 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 80 ns |
| Halogen Free | Halogen Free |
| Rise Time | 16ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 8ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
NCP5351DR2G Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tape & Reel (TR).The configuration is supported by 2 drivers.There is a mounting bracket in the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~6.5V supply voltage.N-Channel MOSFET is the gate type used for this design.-30°C~125°C TJ is the allowed temperature range for this device.Inverting, Non-Inverting is used as the input type.Its configuration is based on a total of 8 terminations.Numerous related parts are available for its base part number NCP5351.You mount it with Surface Mount.As a result, it is configured with 8 pins when it is designed.The device is specifically designed to operate at 5V volts.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.In the maximum case, the output current can be limited to 4A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.There are 8 component pins on the board.High-side voltage - Max (Bootstrap) can be as low as 25V.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 5V.
NCP5351DR2G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 25V
NCP5351DR2G Applications
There are a lot of ON Semiconductor NCP5351DR2G gate drivers applications.
- Power factor correction (PFC) circuits
- Refrigerator
- Dual-Battery Systems
- High power buffers
- Pulse transformer drivers
- Motor Control
- Topologies
- Portable Media Players
- Video amplifiers
- DC/DC converters
