NCP5351MNR2
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -30°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~6.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP5351 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 16ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 8ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.08 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.037 µs |
| High Side Voltage - Max (Bootstrap) | 25V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP5351MNR2 Overview
In order to increase flexibility, the package 10-VFDFN Exposed Pad is used.A package of Tape & Reel (TR) has been used.The configuration is supported by 2 drivers.Surface Mount is mounted in the way.In the absence of a power supply voltage of 4.5V~6.5V V, it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.This device can operate at temperatures up to -30°C~125°C TJ.A type of Inverting, Non-Inverting is used for input in this program.10 terminations constitute its foundation.You will find various related parts under the base part number NCP5351.The mount method is Surface Mount.During design, it is configured with 10 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 5V.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.Its subcategory of MOSFET Drivers contains various useful electronic components.There are 10 component pins on the board.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 25V.The power supply of 5V is able to solve the power supply problems for a wide variety of applications.
NCP5351MNR2 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 25V
NCP5351MNR2 Applications
There are a lot of ON Semiconductor NCP5351MNR2 gate drivers applications.
- PCMCIA applications
- Isolated Supplies for controller area network (CAN),
- High frequency line drivers
- Portable computers
- Refrigerator
- Head-up and Head mounted displays
- Power factor correction (PFC) circuits
- Industrial motor drives - compact, standard, premium, servo drives
- Commercial and agricultural vehicles (CAV)
- Smart Phones
