NCP5351MNR2G
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -30°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~6.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5351 |
| Pin Count | 10 |
| Max Output Current | 4A |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Propagation Delay | 80 ns |
| Input Type | Inverting, Non-Inverting |
| Halogen Free | Halogen Free |
| Rise Time | 16ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 8ns 14ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.08 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.037 µs |
| High Side Voltage - Max (Bootstrap) | 25V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP5351MNR2G Overview
Gate drivers provides greater flexibilGate driversy to use the 10-VFDFN Exposed Pad package.The packaging method is indicated by Tape & Reel (TR).This configuration includes 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~6.5V supply voltage.Gate type N-Channel MOSFET is designed for it.Mosfet driver is possible to use this device at temperatures as low as -30°C~125°C TJ.Inverting, Non-Inverting is used as its input type.The configuration starts with 10 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number NCP5351.You mount it with Surface Mount.In the device, there are 10 pins.A supply voltage of 5V is required for operation.As a maximum, there is 4A limit to the output current.Its subcategory of MOSFET Drivers contains various useful electronic components.The number of component pins is 10.The high-side voltage - Max (Bootstrap) can be up to 25V.Based on its power supplies of 5V, it solves the problem of power supply failure for a variety of applications.
NCP5351MNR2G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 25V
NCP5351MNR2G Applications
There are a lot of ON Semiconductor NCP5351MNR2G gate drivers applications.
- Portable computers
- General Purpose 3-Phase Inverter
- DC/DC converters
- Telecom switch mode power supplies
- Isolated Gate Driver Supplies
- Industrial Power Supplies
- Isolated switch mode power supplies (SMPS)
- Motor Controls
- AC-DC Inverters
- Welding
