NCP5355DG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5355 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Current | 2A |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 2A |
| Supply Voltage1-Nom | 12V |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.055 µs |
| High Side Voltage - Max (Bootstrap) | 26V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP5355DG Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tube is the packaging method.There are 2 drivers installed for this device.Surface Mount is the way in which it is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 8V~14V supply voltage.The gate type on this device is N-Channel MOSFET.For this device, the temperature range is 0°C~125°C TJ.This program uses the input type of Inverting, Non-Inverting.Initially, the configuration is composed of 8 terminations.There are various parts that can be found under its base part number NCP5355.Surface Mount is the way it takes to mount the device.When the device is designed, it has 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.This subcategory of MOSFET Drivers has a number of useful electronic components.The board has a total of 8 component pins.The high-side voltage - Max (Bootstrap) can be up to 26V.An output current of 2A is supported.
NCP5355DG Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 26V
NCP5355DG Applications
There are a lot of ON Semiconductor NCP5355DG gate drivers applications.
- Line drivers
- High power buffers
- Industrial Motor Inverter - Power Tools, Robotics
- DC/DC converters
- Topologies
- Motor controllers
- Broadcast equipment
- Motor Control
- General Purpose 3-Phase Inverter
- Isolated Supplies for controller area network (CAN),
