NCP5359ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Voltage - Supply | 10V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Base Part Number | NCP5359 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 20 ns |
| Rise / Fall Time (Typ) | 16ns 15ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Logic Voltage - VIL, VIH | 1V 2V |
| High Side Voltage - Max (Bootstrap) | 30V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP5359ADR2G Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the packaging method.Configuration is based on 2 drivers.Its recommended mounting way is Surface Mount.When the supply voltage is set to 10V~13.2V, it can demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.There is a temperature range for this device of 0°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Mosfet driver is based on 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number NCP5359.Surface Mount is the way it takes to mount the device.When designing, the device is configured with 8 pins.The number of component pins is 8.There can be a voltage up to 30V on the high-side (Bootstrap).The basis of this system consists of 1 outputs.In this case, the voltage is 35V.This IC uses SWITCHING REGULATOR as its analog input.
NCP5359ADR2G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 30V
NCP5359ADR2G Applications
There are a lot of ON Semiconductor NCP5359ADR2G gate drivers applications.
- Telecom switch mode power supplies
- Isolated Supplies for controller area network (CAN),
- High frequency line drivers
- Industrial Power Supplies
- DC/DC converters
- Topologies
- Motor Controls
- Head-up and Head mounted displays
- Solar inverters
- RGB applications
