NCP5383MNR2G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | MATTE TIN |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Output Current-Max | 0.009A |
| Frequency - Switching | 100kHz~400kHz |
| Input Voltage (Max) | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Clock Sync | No |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
NCP5383MNR2G Overview
With a 24-VFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. 2 outputs can be generated with the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 4.5V~13.2V and has a 4.5V~13.2V supply voltage. Qualified to work in a 0°C~70°C TA dc switcher. With this switching controller, you can switch at 100kHz~400kHz. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at QUAD. The 24 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. The minimum input voltage of the dc dc voltage regulator should be 4.5V. The dc to dc regulator can only accept 18V input voltage. A maximum value of 0.009A is output for current.
NCP5383MNR2G Features
Transistor Driver Outputs
Switching Frequency: 100kHz~400kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
NCP5383MNR2G Applications
There are a lot of Rochester Electronics, LLC NCP5383MNR2G DC to DC converter applications.
- CMM
- Linear guide
- Constant current circuits
- Planers
- Television equipment
- ATMs
- Mobile phones
- Solar power plants
- Grinders
- Current source circuits
