NCP5383MNR2G
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5383 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 0.009A |
| Frequency - Switching | 100kHz~400kHz |
| Input Voltage (Max) | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 440kHz |
| Clock Sync | No |
| Duty Cycle | 100 % |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | OBSOLETE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
NCP5383MNR2G Overview
With a 24-VFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. 2 outputs can be generated with the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. 4.5V~13.2V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a 0°C~70°C TA rating. Switching can be done at 100kHz~400kHz with this switching controller. As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Power Good, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminal (s) are designed at QUAD . A variety of terminations with 24 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "NCP5383". There are only 24 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. The dc to dc regulator can only accept 18V input voltage. The max frequency of the pmic can reach 440kHz. A maximum value of 0.009A is output for current.
NCP5383MNR2G Features
Transistor Driver Outputs
Switching Frequency: 100kHz~400kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
NCP5383MNR2G Applications
There are a lot of ON Semiconductor NCP5383MNR2G DC to DC converter applications.
- Series voltage regulation circuits
- Computed tomography (CT)
- Electric water heaters
- Power supplies of electronic gadgets
- Bending machines
- Post equipment
- Lathes
- Digital display device
- Analog precision reference circuits
- Automatic testing equipment
