NCP5422ADR2G
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | V2 CONTROL MODE IS ALSO AVAILABLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5422 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.2V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 7.8V~16V |
| Control Features | Frequency Control |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 150kHz~600kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 750kHz |
| Max Duty Cycle | 100 % |
| Clock Sync | No |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP5422ADR2G Overview
Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 7.8V~16V and has a 7.8V~16V supply voltage. Suitable for a 0°C~70°C TA dc switcher. It can switch at 150kHz~600kHz. dc dc regulator can be generalized using Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. DUAL are the position of the terminal of the switching converters. A variety of 16 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Other relevant dc to dc converter ics can be found by searching "NCP5422". 16 pins are on switching converter. Switching converter is a special type of Switching Regulator or Controllers. The dc dc regulator's usual output current is 1.5A, which should be noted down when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. 750kHz is the maximum frequency of this dc regulators. The value of DC to DC voltage regulator is set to V2 CONTROL MODE IS ALSO AVAILABLE in order to better satisfy the requirement. It is suggested that users apply 13.2V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit.
NCP5422ADR2G Features
Transistor Driver Outputs
Switching Frequency: 150kHz~600kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
V2 CONTROL MODE IS ALSO AVAILABLE
NCP5422ADR2G Applications
There are a lot of ON Semiconductor NCP5422ADR2G DC to DC converter applications.
- Emergency lighting monitoring equipment
- Milling machines
- Computer application technology
- Telecommunications equipment
- Computer rooms
- Production lines
- Nuclear power plants
- Refrigerators of central air conditioners
- Servo drive system
- Computed tomography (CT)
