NCP5602MUTBG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFLGA Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Current Rating | 60mA |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5602 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 200mW |
| Output Current | 60mA |
| Max Output Voltage | 5.7V |
| Voltage - Output | 4.8V~5.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current per Channel | 60mA |
| Internal Switch(s) | Yes |
| Dimming | Analog |
| Number of Segments | 2 |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP5602MUTBG Overview
On the board, there is also a 12-UFLGA Exposed Pad package that saves space.2 outputs are designed into LED drivers.The mounting method adopted is Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Regulator.It is capable of working normally at -40°C~85°C TA.Taking advantage of Backlight has considerable benefits.As a result, it operates based on the frequency of 1MHz.There are 12 terminations associated with it.Its configuration is based on 12 pins.There are 2 segments in it.It's mounted by Surface Mount.There is a base part number NCP5602 for this LED driver.Ideally, the supply voltage should be 7V.A voltage of 4.8V~5.7V is produced by it.In this device, there are 12 pins.For highest efficiency, it works with a minimal supply voltage of 2.7V.A load can be supplied with 60mA current.Systems require 5.5V voltage to operate.It is recommended that the output voltage be no higher than 5.7V.
NCP5602MUTBG Features
Available in the 12-UFLGA Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
Operating with the supply voltage of 5.5V
NCP5602MUTBG Applications
There are a lot of ON Semiconductor NCP5602MUTBG LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lights
- Replacement lamps
- Flicker-free LED Lighting using R1580N
- LED Lightings for Industrial Equipment
- LED Lightings for Inspection Devices
- Portable lighting
- Linear fluorescent
- Other Electronic Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
