NCP5604AMTR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin (Sn) |
| Applications | Backlight, Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP5604 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Efficiency | 87 % |
| Max Output Current | 120mA |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 320mW |
| Output Current | 100mA |
| Max Supply Current | 1mA |
| Max Output Voltage | 6V |
| Voltage - Output | 4.8V~6V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Internal Switch(s) | Yes |
| Number of Drivers | 1 |
| Dimming | Analog, PWM |
| Number of Segments | 4 |
| Switching Frequency | 200kHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP5604AMTR2G Overview
The 16-WFQFN Exposed Pad package saves space on the board. For the design of these LED drivers, 4 outputs are used.Surface Mount is used to mount the led light driver.In this case, the DC DC Regulator emerges as highly efficient and reliable.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Taking advantage of Backlight, Camera Flash has considerable benefits.A frequency of 1MHz is used as the basis for operation.For its operation, 16 terminations are designed.Its configuration is based on 16 pins.It is estimated that there are 4 segments.This is mounted by Surface Mount.This LED driver has the part number NCP5604.Ideally, the supply voltage should be 5.5V.It produces a voltage of 4.8V~6V volts.A device with 16 pins is available.As a result, it can also be classified as Display Drivers.At its minimal input voltage, it operates at 2.7V.The system operates at a minimum supply voltage of 2.7V in order to achieve maximum efficiency.In the event that the maximum supply current is allowed, it reaches 5.5V.A minimal supply current is required in order for this device to provide high efficiency.The load is capable of receiving 100mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 200kHz.The maximum output current of 120mA allows it to deliver all benefits of a LED driver.There shouldn't be an increase in output voltage over 6V.
NCP5604AMTR2G Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.3V
Switching frequency of 200kHz
NCP5604AMTR2G Applications
There are a lot of ON Semiconductor NCP5604AMTR2G LED Driver ICs applications.
- Replacement lamps
- Gallery lighting
- LED headlights
- Down lights
- LED backlight driver for LCD displays for portable equipment
- Constant Voltage Power Source for portable equipment
- LED Lightings for Industrial Equipment
- Medical surgery lighting
- Auxiliary lights for on-vehicle cameras
- LED Lighting PFCs, Linear Dimmable
