NCP5623AMUTBG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFLGA Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight, Camera Flash |
| Max Power Dissipation | 200mW |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Frequency | 1MHz |
| Base Part Number | NCP5623 |
| Pin Count | 12 |
| Number of Outputs | 3 |
| Output Voltage | 5.7V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 200mW |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current per Channel | 90mA |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C, PWM |
| Number of Segments | 3 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | YES |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.6mm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP5623AMUTBG Overview
12-UFLGA Exposed Pad package saves space on the board. A LED driver with 3 outputs is designed.The mounting method adopted is Surface Mount.It emergys as a DC DC Regulator with high efficiency and reliable performance.It is possible for the led driver ic to operate normally at -40°C~85°C TA.It provides considerable benefits for Backlight, Camera Flash.Based on the frequency of 1MHz, it operates.The operation of this system is supported by 12 terminations.The configuration of the board is built around 12 pins.Undetermined failures can occur if the voltage supply is below 2.7V.The segment count is 3.The mount is on its way to Surface Mount.You can find this LED driver under the base part number NCP5623.The voltage of 5.5V is acceptable.A device with 12 pins is available.A minimal supply voltage of 2.7V is required for it to achieve the highest efficiency.There is 5.7V voltage at the output terminal.
NCP5623AMUTBG Features
Available in the 12-UFLGA Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3V
Output voltage of 5.7V
NCP5623AMUTBG Applications
There are a lot of ON Semiconductor NCP5623AMUTBG LED Driver ICs applications.
- Street lighting
- Stage and Studio lighting
- Down lights
- OLED power supply for portable equipment
- Portable lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED backlight driver for LCD displays for portable equipment
- Refrigeration lighting
- Scanners and Handy Terminals
- Power source for accessories such as car audios, car navigation systems, and ETC systems
