NCP5623BMUTBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFLGA Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight, Camera Flash |
| Subcategory | Display Drivers |
| Max Power Dissipation | 200mW |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | NCP5623 |
| Pin Count | 12 |
| Number of Outputs | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 200mW |
| Output Current | 90mA |
| Max Supply Current | 1mA |
| Voltage - Output | 4.4V~5.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 90mA |
| fmax-Min | 0.4 MHz |
| Dimming | I2C, PWM |
| Number of Segments | 3 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 550μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP5623BMUTBG Overview
Additionally, there is a 12-UFLGA Exposed Pad package for saving space.LED drivers designed using this technology use 3 outputs.As a mounting method, Surface Mount is used.In this case, it emerges as a DC DC Regulator with a high efficiency.It is possible for the led light driver to operate at a temperature of -40°C~85°C TA.Backlight, Camera Flash has many advantages.In order for it to operate, it has 12 terminations.It has a base configuration of 12 pins.A total of 3 segments have been created.I have mounted it by Surface Mount.NCP5623 is the base part number for the LED driver.There is no problem with the voltage of 5.5V.This device has an output voltage of 4.4V~5.7V volts.12 pins are included in it.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.The input voltage must be minimally 2.7V.This system is designed to operate at a minimum voltage of 2.7V to achieve maximum efficiency.Whenever the maximum supply current is allowed, the value reaches 5.5V.When the maximum supply current is less than 1mA, the device is able to provide a high level of efficiency.It is possible to supply the load with 90mA current.Having the switching frequency at 1MHz enables this electronic component to perform at its best.
NCP5623BMUTBG Features
Available in the 12-UFLGA Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3V
Switching frequency of 1MHz
NCP5623BMUTBG Applications
There are a lot of ON Semiconductor NCP5623BMUTBG LED Driver ICs applications.
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Scanners and Handy Terminals
- Museum lighting
- LED backlight driver for LCD displays for portable equipment
- Street lighting
- Panel lighting
- Linear fluorescent
- Down lights
- Industrial LED Lighting: Image Recognition Devices
