NCP5623DTBR2G
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight, Camera Flash |
| Subcategory | Display Drivers |
| Max Power Dissipation | 235mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | NCP5623 |
| Pin Count | 14 |
| Number of Outputs | 3 |
| Output Voltage | 5.7V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 350μA |
| Power Dissipation | 235mW |
| Output Current | 90mA |
| Max Supply Current | 350μA |
| Topology | Charge Pump |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C, PWM |
| Number of Segments | 3 |
| Max Junction Temperature (Tj) | 150°C |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Ambient Temperature Range High | 85°C |
| Height | 1.2mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
NCP5623DTBR2G Overview
The board's 14-TSSOP (0.173, 4.40mm Width) package saves space. As part of the design of this LED driver, there are 3 outputs that have been used.We are using Surface Mount as the mounting method.In this case, it emerges as a Linear with a high efficiency.The LED driver is capable of operating at a temperature of -40°C~85°C TA.It is clear that Backlight, Camera Flash will benefit from the program.In this case, it uses 14 terminations.The LED light driver is configured with a base of 0 pins.In total, it includes 3 segments.There is a device mounted on the Surface Mount.LED drivers can be found under the base part number NCP5623.It is acceptable to supply voltages of 5.5V volts.The device has 14 pins.Furthermore, it can be classified as Display Drivers based on its characteristics.This device operates with a minimum input voltage of 2.7V volts.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 2.7V.The maximum supply current is reached when 5.5V is reached.With a minimum supply current less than 350μA, this device achieves high efficiency.The load is capable of receiving 90mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 1MHz.The voltage at the output terminal is 5.7V.
NCP5623DTBR2G Features
Available in the 14-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3V
Switching frequency of 1MHz
Output voltage of 5.7V
NCP5623DTBR2G Applications
There are a lot of ON Semiconductor NCP5623DTBR2G LED Driver ICs applications.
- Museum lighting
- White LED Backlight for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Flicker-free LED Lighting using R1580N
- Down lights
- Panel lighting
- Amusement Machines
- A- lamps
- Street lighting
- Portable lighting
