NCP5901BMNTBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP5901 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 35V |
| Nominal Supply Current | 12.2mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Halogen Free | Halogen Free |
| Rise Time | 16ns |
| Fall Time (Typ) | 11 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 16ns 11ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 2V |
| Height | 950μm |
| Length | 2mm |
| Width | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP5901BMNTBG Overview
A higher degree of flexibility is achieved by adopting its 8-VFDFN Exposed Pad package.Tape & Reel (TR) represents the packaging method.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.In the direction of Surface Mount, gate drivers is mounted.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~13.2V.Gate type N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.There are 8 terminations to form the base of its configuration.There are various related parts under its base part number NCP5901.Mosfet driver is mounted using the Surface Mount method.At the time of design, it is configured with 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 5V.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.Its subcategory of MOSFET Drivers contains various useful electronic components.The board contains 8 pins for component connections.The voltage it outputs is 35V.
NCP5901BMNTBG Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
NCP5901BMNTBG Applications
There are a lot of ON Semiconductor NCP5901BMNTBG gate drivers applications.
- General Purpose 3-Phase Inverter
- PCMCIA applications
- AC-DC Inverters
- Solar inverters
- High frequency line drivers
- Motor controllers
- Active filtering
- Welding
- Solar power supplies
- Multicolor LED/laser displays
