NCP6324CMTAATBG
| Parameters | |
|---|---|
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 5.5V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 3MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Pitch | 0.5mm |
| Function | Step-Down |
NCP6324CMTAATBG Overview
As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. There are 8 terminations in this harley voltage regulator. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. Space-saving 8-WFDFN Exposed Pad packages are available for this harley voltage regulator. A total of 1 outputs are configured in this voltage regulator. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. The voltage regulator 12v fits the Surface Mount mounting hole. This voltage regulator 12v should operate at a temperature of -40°C~85°C TA when operating. In this voltage regulator 12v, the switching frequency is 3MHz. A dc to dc voltage regulator's minimum input voltage of 2.5V is required for this voltage regulator to operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.6V. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. A voltage regulator 12v such as this falls under the Switching Regulator or Controllers category and belongs to this category. The voltage DC DC switching regulator can provide is up to 5.5V volts. 8 pins are used for switching regulator operation. This voltage regulator 12v should be configured with an output voltage that is at least 600mV. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 2A A. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 5.5V. 5.5V is the supply voltage for this DC-DC switching regulator.
NCP6324CMTAATBG Features
1 outputs
8 pins
Operating supply voltage of 5.5V
NCP6324CMTAATBG Applications
There are a lot of ON Semiconductor NCP6324CMTAATBG Voltage Regulators applications.
- Laboratories
- Automatic plug-in machines
- Bending machines
- Hydro power
- Remotely powered electric motors
- Photovoltaic power
- Window air conditioners
- Combined machine tools
- Computed tomography (CT)
- Post equipment
