NCP803SN160T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP803 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 800nA |
| Nominal Supply Current | 800nA |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.0025mA |
| Min Reset Threshold Voltage | 1.58V |
| Max Reset Threshold Voltage | 1.62V |
| Threshold Voltage | +1.6V |
| Undervoltage Threshold | 1.6V |
| Overvoltage Threshold | 1.62V |
| Height | 940μm |
| Length | 2.9mm |
| Width | 1.3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP803SN160T1G Overview
There are 3 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. Manage ics operate at 3.3V supply voltages. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. This power management has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~105°C TJ. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supervisor's supply current is specified to 800nA. It is always advisable to use NCP803, the base supervisor number, when searching for similar PMICs from the manufacturer.
NCP803SN160T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
NCP803SN160T1G Applications
There are a lot of ON Semiconductor NCP803SN160T1G Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Multi-voltage system
- Efficient information transmission
- Network equipment
- Precision measurement
- Automotive power systems
- Automotive permanent magnet synchronous motors
- Smart meter
- Electrical fire monitoring system
- DC stabilized power supply module
