NCP803SN293T1G
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP803 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 800nA |
| Nominal Supply Current | 800nA |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.0025mA |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 2.96V |
| Height | 1.01mm |
| Length | 3.04mm |
| Width | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TJ |
NCP803SN293T1G Overview
As you can see, this power management is mounted through 3 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. In a 3.3V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. 3 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~105°C TJ. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 800nA. If you want to search for similar IC managements of this manufacturer, you can always refer to NCP803, which is the base power ics number.
NCP803SN293T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
NCP803SN293T1G Applications
There are a lot of ON Semiconductor NCP803SN293T1G Voltage Supervisors applications.
- Automotive power systems
- Electric heating appliances
- Power communication system
- emergency room
- Embedded computing
- Smart meter
- DSP
- Power distribution systems of operating room
- Kitchen appliances
- Electrical fire monitoring system
