NCP803SN438T1G
| Parameters | |
|---|---|
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 800nA |
| Nominal Supply Current | 800nA |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.0025mA |
| Min Reset Threshold Voltage | 4.31V |
| Max Reset Threshold Voltage | 4.45V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.38V |
| Overvoltage Threshold | 4.45V |
| Height | 900μm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP803 |
NCP803SN438T1G Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 3.3V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 3. This power management has 3 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: -40°C~105°C TJ. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 800nA is the recommended value. To find similar IC managements from the manufacturer, you can always search by NCP803.
NCP803SN438T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
NCP803SN438T1G Applications
There are a lot of ON Semiconductor NCP803SN438T1G Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Utility meter
- Electrical fire monitoring system
- Precision measurement
- Power distribution systems of infant care room
- Personal computers
- Important electronics for automotive protection
- Automotive permanent magnet synchronous motors
- Smart meter
- Cloud computing
