NCP81074BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Voltage - Supply | 4.5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Output Voltage | 20.3V |
| Max Output Current | 10A |
| Nominal Supply Current | 1.2mA |
| Output Current | 600mA |
| Propagation Delay | 15 ns |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 4ns |
| Fall Time (Typ) | 4 ns |
| Rise / Fall Time (Typ) | 4ns 4ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.027 µs |
| Output Peak Current Limit-Nom | 10A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 10A 10A |
| Max Junction Temperature (Tj) | 140°C |
| High Side Driver | NO |
| Turn Off Time | 0.027 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP81074BDR2G Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Cut Tape (CT) represents the package.This configuration includes 1 drivers.Surface Mount is the way in which it is mounted.When the supply voltage is set to 4.5V~20V, it can demonstrate its superiority.This device is designed with a N-Channel MOSFET gate type.For this device, the temperature range is -40°C~150°C TJ.The input type is Inverting, Non-Inverting.Its configuration starts with 8 terminations.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.Specification is for 12V supply voltage operation.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 10A.Mosfet gate drivers supports a current output of 600mA.In this case, the voltage is 20.3V.
NCP81074BDR2G Features
Embedded in the Cut Tape (CT) package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
NCP81074BDR2G Applications
There are a lot of ON Semiconductor NCP81074BDR2G gate drivers applications.
- Telecom switch mode power supplies
- General Purpose 3-Phase Inverter
- Head-up and Head mounted displays
- Pulse transformer drivers
- Refrigerator
- Solar power supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Topologies
- Isolated Supplies for controller area network (CAN),
- 3-Phase Motor Inverter Driver
