NCS2002SN2T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NC*2002 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3.5V |
| Number of Elements | 1 |
| Power Supplies | +-2.5V |
| Operating Supply Current | 820μA |
| Nominal Supply Current | 2μA |
| Power Dissipation | 340mW |
| Output Current | 86mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 0.9V~7V ±0.45V~3.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 128mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 900kHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 900 kHz |
| Voltage Gain | 92.04dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCS2002SN2T1G Overview
Packaged in a SOT-23-6 Thin, TSOT-23-6 case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 6. There are a total of 6 pins on this op amp. Please take in mind that op amp should be run at 2.5V. A type of Operational Amplifiers buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 6 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 6mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~105°C . Operational amplifier can operate supply current at 820μA. The voltage gain should stay at 92.04dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There is a rating of 1 for the operating supply voltage of the buffer op amp. The operating supply voltage of the buffer op amp is rated at 3.5V. The instrumentation amplifier is packed in the form of TAPE AND REEL.
NCS2002SN2T1G Features
6 Pins
supply voltage of 2.5V
92.04dB voltage gain
Output Type: Rail-to-Rail
NCS2002SN2T1G Applications
There are a lot of ON Semiconductor NCS2002SN2T1G Instrumentational OP Amps applications.
- Division circuits
- Oscilloscopes
- Voltage regulation circuit
- Signal operation
- High gain DC amplifier
- Strain gauges
- Tablets
- Industrial applications including automation
- Radar
- Weak signal detection
