NCS2003SN2T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 300μA |
| Slew Rate | 14V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Max Input Voltage | 5.5V |
| Voltage - Supply, Single/Dual (±) | 1.7V~5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 96mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 7MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 92dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 1kHz |
| Programmable Power | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCS2003SN2T1G Overview
A SC-74A, SOT-753 case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. During the past two weeks, there have been close to 5 terminations. There are a total of 5 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 1.8V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 5 pins are present on the instrumentation amplifier. There is an input offset voltage of 500μV for this buffer op amp. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. You can run this op amp ic on 300μA . It is a member of the 92dB's 92dB family. As far as the device is concerned, buffer amplifier has 1 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. This linear amplifier pack is based on the TAPE AND REEL axis.
NCS2003SN2T1G Features
5 Pins
supply voltage of 1.8V
92dB voltage gain
Output Type: Rail-to-Rail
NCS2003SN2T1G Applications
There are a lot of ON Semiconductor NCS2003SN2T1G Instrumentational OP Amps applications.
- Precision measurement
- Strain gauges
- Industrial control system
- Fission chambers
- Division circuits
- Video computer boards
- Addition operation circuits
- Gaming industry
- Vehicle electronics
- Integrator circuits
