NCS2200SN2T1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | NCS2200 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparators |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCS220* |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 15μA |
| Output Current | 70mA |
| Max Supply Current | 15μA |
| Propagation Delay | 1.1 μs |
| Quiescent Current | 17μA |
| Response Time | 1100 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 0.85V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 17μA |
| Voltage - Input Offset (Max) | 5mV @ 6V |
| Current - Input Bias (Max) | 1pA @ 6V |
| Hysteresis | 20mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCS2200SN2T1 Overview
Electronic comparator is packaged in SOT-23-5 Thin, TSOT-23-5 for convenient transportation.A comparator with a Complementary, Rail-to-Rail output is used here.The chip is packaged with Tape & Reel (TR) .The device is designed with 5 terminations.Electronic comparator is a part of Comparators family.A comparator supplied with 3V voltage can complete many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator consists of 1 elements in total.Electronic comparator has 5 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~105°C in order to prevent malfunctions.This comparator has 5 pins.Try search NCS220* to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 17μA .The board has a Surface Mount for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of 15μA .If the current supply exceeds 15μA , the comparator could malfunction.Electronic comparator is possible to input up to 1pA current into the device.The part is from NCS2200 comparator series.
NCS2200SN2T1 Features
Complementary, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 17μA
NCS2200SN2T1 Applications
There are a lot of ON Semiconductor NCS2200SN2T1 linear comparators applications.
- Battery-Powered Electronics
- Set Top Boxes
- Ultra-Low Power Systems
- Current and voltage sensing
- Power Supervision
- System control and monitoring
- Wide Range VCO; MOS Clock Timers
- Mobile Phones and Tablets
- Alarm and Monitoring Circuits
- Zero-Crossing Detectors
