NCS2200SQ2T2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | NCS2200 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCS220* |
| Pin Count | 5 |
| Output Type | Complementary, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 15μA |
| Output Current | 70mA |
| Max Supply Current | 15μA |
| Propagation Delay | 1.1 μs |
| Quiescent Current | 17μA |
| Response Time | 1100 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 0.85V~6V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 17μA |
| Voltage - Input Offset (Max) | 5mV @ 6V |
| Current - Input Bias (Max) | 1pA @ 6V |
| Hysteresis | 20mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCS2200SQ2T2G Overview
In order to facilitate transportation, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .Output type Complementary, Rail-to-Rail is used for this comparator.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 5 terminals of the comparator.Electronic comparator is a part of Comparator family.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.This element consists of 1 elements in total.As a result, it contains 5 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~105°C in order to prevent malfunctions.The comparator is equipped with 5 pins.Alternatively, you may search for NCS220* to find more pin-to-pin solutions for your specific needs.As a result, this comparator displays a quiescent current of 17μA .Normally, the nominal supply current should be 15μA .If the current supply exceeds 15μA , the comparator might be damaged.Electronic comparator is possible to input a maximum of 1pA current into the device.This part is from the NCS2200 comparator series.
NCS2200SQ2T2G Features
Complementary, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 17μA
NCS2200SQ2T2G Applications
There are a lot of ON Semiconductor NCS2200SQ2T2G linear comparators applications.
- Mobile Communications
- Power management
- Security Detection Systems
- System control and monitoring
- High-Speed Differential Line Receiver
- Self-diagnostics
- Battery management and protection
- Pulse, Squarewave, and Time Delay Generators
- Consumer Medical Electronics
- Ultra-Low Power Systems
