NCS2200SQLT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | NCS2200 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin (Sn) |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCS220* |
| Pin Count | 6 |
| Output Type | Complementary, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 15μA |
| Output Current | 70mA |
| Max Supply Current | 15μA |
| Propagation Delay | 1.1 μs |
| Quiescent Current | 17μA |
| Response Time | 1100 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 0.85V~6V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 17μA |
| Voltage - Input Offset (Max) | 5mV @ 6V |
| Current - Input Bias (Max) | 1pA @ 6V |
| Hysteresis | 20mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Length | 2.2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCS2200SQLT1G Overview
To facilitate transportation, it comes packaged in 6-VDFN Exposed Pad .The comparator has an output type of Complementary, Rail-to-Rail .We ship the part through Tape & Reel (TR) .There are6 terminals on the comparator.Electronic comparator is a part of Comparator family.With a 3V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical General Purpose comparator.This element consists of 1 elements in total.Electronic comparator has 6 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~105°C in order to prevent malfunctions.This comparator has 6 pins.In order to find a solution that meets your specific needs, search NCS220* for more pin-to-pin solutions.A quiescent current of 17μA is observed in this comparator.Normally, the nominal supply current should be 15μA .If the current supply exceeds 15μA , the comparator could malfunction.Electronic comparator is possible to input a maximum current of 1pA into the device.Comparator electronics is a comparator part from the NCS2200 series.
NCS2200SQLT1G Features
Complementary, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 17μA
NCS2200SQLT1G Applications
There are a lot of ON Semiconductor NCS2200SQLT1G linear comparators applications.
- Security Detection Systems
- Wearable Devices
- Handheld Instruments
- Portable and Battery-Powered Systems
- Alarm and Monitoring Circuits
- Threshold Detectors
- General-Purpose, Low-Voltage Applications
- Window Comparators
- Notebooks and PDAs
- Mobile Communications
