NCS2201SN1T1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | NCS2200 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparators |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCS220* |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 15μA |
| Propagation Delay | 1.1 μs |
| Quiescent Current | 17μA |
| Response Time | 1100 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 0.85V~6V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 17μA |
| Voltage - Input Offset (Max) | 5mV @ 6V |
| Current - Input Bias (Max) | 1pA @ 6V |
| Hysteresis | 20mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCS2201SN1T1 Overview
A convenient packaging is provided in the form of SOT-23-6 Thin, TSOT-23-6 .A comparator with an output type of Complementary, Rail-to-Rail is being used.The part is shipped by Tape & Reel (TR) .The comparator has 6 terminals.Electronic comparator is a component of the Comparators family.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .In total, it contains 1 elements.There are 6 pins on this board.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~105°C to prevent malfunctions.6 pins are available on the comparator.You can find more pin-to-pin solutions by searching NCS220* .A quiescent current of 17μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 15μA when using the device.You are allowed to input a maximum current of 1pA into the device.Comparator electronics comes from the series of NCS2200 comparator parts.
NCS2201SN1T1 Features
Complementary, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 17μA
NCS2201SN1T1 Applications
There are a lot of ON Semiconductor NCS2201SN1T1 linear comparators applications.
- Metering Systems
- Building automation
- Set Top Boxes
- Zero-Crossing Detectors
- Window Comparators
- Current and voltage sensing
- General Purpose Low Voltage Applications
- Industrial
- Power management
- Notebooks and PDAs
