NCS2202SQ1T2G
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin (Sn) |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCS220* |
| Pin Count | 5 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 15μA |
| Max Supply Current | 15μA |
| Propagation Delay | 1.1 μs |
| Quiescent Current | 17μA |
| Response Time | 1100 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 0.85V~6V |
| Halogen Free | Halogen Free |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 17μA |
| Voltage - Input Offset (Max) | 5mV @ 6V |
| Current - Input Bias (Max) | 1pA @ 6V |
| Hysteresis | 20mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C |
NCS2202SQ1T2G Overview
For convenience, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .This comparator is of the Open-Drain, Rail-to-Rail output type.This chip is designed with the Tape & Reel (TR) package.The device is designed with 5 terminations.The electrical component in this case belongs to the Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical General Purpose comparator.The total number of elements is 1 .The device contains 5 pins.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~105°C should be used for the operating temperature in order to prevent malfunctions.There are 5 pins on the comparator.If you require more pin-to-pin solutions, search NCS220* for more options.A quiescent current of 17μA is displayed by this comparator.Normally, the nominal supply current should be 15μA .The compartator could be damaged if the current supply exceeds 15μA .Electronic comparator is possible to input up to 1pA current into the device.
NCS2202SQ1T2G Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 17μA
NCS2202SQ1T2G Applications
There are a lot of ON Semiconductor NCS2202SQ1T2G linear comparators applications.
- Battery-Powered Electronics
- Metering Systems
- Motor drives
- Zero-Crossing Detectors
- Consumer Medical Electronics
- Body Control Modules
- Mobile Phones
- Portable and Battery-Powered Systems
- System control and monitoring
- Handheld Instruments
