NCS2202SQ2T2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCS220* |
| Pin Count | 5 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 15μA |
| Max Supply Current | 15μA |
| Propagation Delay | 1.1 μs |
| Quiescent Current | 17μA |
| Response Time | 1100 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 0.85V~6V |
| Halogen Free | Halogen Free |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 17μA |
| Voltage - Input Offset (Max) | 5mV @ 6V |
| Current - Input Bias (Max) | 1pA @ 6V |
| Hysteresis | 20mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCS2202SQ2T2G Overview
Electronic comparator is packaged in 5-TSSOP, SC-70-5, SOT-353 for convenient transportation.There is a Open-Drain, Rail-to-Rail output type for this comparator.The chip is packaged with Tape & Reel (TR) .The comparator has a total of 5 terminals.The chip belongs to Comparator .In the presence of a 3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .There are a total of 1 elements in it.Electronic comparator has 5 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to -40°C~105°C to avoid mal-function.This comparator has 5 pins.If you require more pin-to-pin solutions, search NCS220* for more options.A quiescent current of 17μA is displayed by this comparator.Electronic comparator is recommended that the nominal supply current be 15μA in order to use the device normally.Current supply exceeding 15μA could cause disfunction of the compartator.There is a maximum current that can be input into the device of 1pA .
NCS2202SQ2T2G Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 17μA
NCS2202SQ2T2G Applications
There are a lot of ON Semiconductor NCS2202SQ2T2G linear comparators applications.
- Battery-Powered Electronics
- Set Top Boxes
- Window Comparators
- General-Purpose, Low-Voltage Applications
- Analog front end
- Limit Comparators
- Automatic Test Equipment
- Power management
- Infotainment and Clusters
- Ultra-Low Power Systems
