NCS2203SN1T1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | NCS2200 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparators |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCS220* |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 15μA |
| Propagation Delay | 1.1 μs |
| Quiescent Current | 17μA |
| Response Time | 1100 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 0.85V~6V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 17μA |
| Voltage - Input Offset (Max) | 5mV @ 6V |
| Current - Input Bias (Max) | 1pA @ 6V |
| Hysteresis | 20mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCS2203SN1T1 Overview
The product is packaged in SOT-23-6 Thin, TSOT-23-6 to facilitate transportation.The comparator has a type Open-Drain, Rail-to-Rail output.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has 6 terminals.The electrical component here belongs to the Comparators family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .There are a total of 1 elements in it.As a result, it contains 6 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~105°C .The comparator has a pin count of 6 .In case you are looking for more pin-to-pin solutions, you may want to search NCS220* .There is a quiescent current of 17μA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 15μA when using the device.You are allowed to input a maximum current of 1pA into the device.A comparator part from the NCS2200 series is used in this part.
NCS2203SN1T1 Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 17μA
NCS2203SN1T1 Applications
There are a lot of ON Semiconductor NCS2203SN1T1 linear comparators applications.
- General Purpose Low Voltage Applications
- Window Comparators
- Factory automation & control
- Zero-Crossing Detectors
- Hand-Held Electronics
- Current and voltage sensing
- Wearable Devices
- Industrial
- Battery management and protection
- Security Detection Systems
