banner_page

NCS2333DMR2G

60pA 118 dB Instrumentational OP Amps 0.0004μA 1.8V~5.5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCS2333DMR2G
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 410
  • Description: 60pA 118 dB Instrumentational OP Amps 0.0004μA 1.8V~5.5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Published 2011
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin (Sn)
Subcategory Operational Amplifier
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
JESD-30 Code S-PDSO-G8
Output Type Rail-to-Rail
Number of Circuits 2
Current - Supply 21μA
Slew Rate 0.15V/μs
Amplifier Type Zero-Drift
Common Mode Rejection Ratio 118 dB
Current - Input Bias 60pA
Voltage - Supply, Single/Dual (±) 1.8V~5.5V
Gain Bandwidth Product 270kHz
Unity Gain BW-Nom 255 kHz
Average Bias Current-Max (IIB) 0.0004μA
Supply Voltage Limit-Max 7V
Voltage - Input Offset 6μV
Height Seated (Max) 1.1mm
Length 3mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NCS2333DMR2G Overview


In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. Buffer amps of this type are called Zero-Drift-types. The op amp is delivered to you in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3.3V. It should be noted that this op amp is a type of Operational Amplifier device. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. A instrumentation amplifier like this has 2 circuits. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. This electronic part is recommended to be used with an 21μA supply for best performance.

NCS2333DMR2G Features


supply voltage of 3.3V
Output Type: Rail-to-Rail

NCS2333DMR2G Applications


There are a lot of ON Semiconductor NCS2333DMR2G Instrumentational OP Amps applications.

  • Test and measurement instruments
  • Fission chambers
  • Instrumentation
  • PDA
  • Large motor controllers
  • Automation control systems
  • Commercial audio systems
  • Biopotential
  • Active probe
  • Industrial applications including automation

Write a review

Note: HTML is not translated!
    Bad           Good