NCV0372BDWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Pin Count | 16 |
| Number of Circuits | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 8mA |
| Supply Current-Max | 14mA |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 100nA |
| Max Input Voltage | 40V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 1A |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 2.5V |
| Nominal Gain Bandwidth Product | 1.4MHz |
| Length | 10.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV0372BDWR2G Overview
Op amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 16h termination of the year. It consists of a total of 16 pins in total. Please take in mind that this instrumentation amplifier should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 16 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 1mV voltage. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 8mA . It is recommended to keep the voltage gain at 100dB at all times. The buffer amp consists of 2 circuits in total. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. The electrical part is capable of being powered by a voltage of under 40V, which means that it can be used with any voltage supply. The linear amplifier's supply voltage should be higher than 5V. Conduct linear amplifier under the dual suuply voltage of 20V. Automotive, AEC-Q100 is the number that corresponds to the series of the buffer op amp.
NCV0372BDWR2G Features
16 Pins
supply voltage of 15V
100dB voltage gain
NCV0372BDWR2G Applications
There are a lot of ON Semiconductor NCV0372BDWR2G Instrumentational OP Amps applications.
- Weighing systems
- Digital cameras
- Tablets
- Switching amplifier
- Fast A/D and D/A converters
- Thermocouples
- Communication
- Oscilloscopes
- Broadcasting
- Active probe
