NCV2002SN1T1
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NC*2002 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3.5V |
| Number of Elements | 1 |
| Power Supplies | +-2.5V |
| Operating Supply Current | 820μA |
| Nominal Supply Current | 2μA |
| Power Dissipation | 340mW |
| Output Current | 86mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 0.9V~7V ±0.45V~3.5V |
| Output Current per Channel | 128mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 900kHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 900 kHz |
| Voltage Gain | 92.04dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCV2002SN1T1 Overview
A SOT-23-6 Thin, TSOT-23-6 case is used to package the op amp. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 6. A total of 6 pins are attached to buffer op amp. The linear amplifier should be run at 2.5V at all times, so please keep that in mind when using it. A type of Operational Amplifiers buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 6 pins. Regarding input offset voltage, buffer amplifier rates 6mV voltage. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. You can run this op amp ic on 820μA . It is a member of the 92.04dB's 92.04dB family. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 3.5V voltage. As a result of this, the buffer amplifier is packed in TAPE AND REEL. Automotive, AEC-Q100 corresponds to the op amp's series.
NCV2002SN1T1 Features
6 Pins
supply voltage of 2.5V
92.04dB voltage gain
Output Type: Rail-to-Rail
NCV2002SN1T1 Applications
There are a lot of ON Semiconductor NCV2002SN1T1 Instrumentational OP Amps applications.
- earphone
- Instrumentation
- High/low-pass filter circuit
- Weak signal detection
- Non-polarized electrodes
- RF cable systems
- Comparator
- High speed sample
- Signal operation
- Medical imaging
