NCV20061SQ3T2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| JESD-30 Code | R-PDSO-G5 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Current - Supply | 140μA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Bandwidth | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 500μV |
| Current - Output / Channel | 19mA |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
NCV20061SQ3T2G Overview
There is a 5-TSSOP, SC-70-5, SOT-353 case in which the instrumentation amplifier is packaged. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be 5 terminations in the next few months. It would be helpful if you could remember that this op amp ic should be powered by an 3.3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~125°C. A linear amplifier like this has 1 circuits on it. On the output type, there are Rail-to-Rail different types of op amps. As a result, it is recommended that a power supply of 140μA be used with this electronic part. The Automotive, AEC-Q100 represents the op amp's series number.
NCV20061SQ3T2G Features
supply voltage of 3.3V
Output Type: Rail-to-Rail
NCV20061SQ3T2G Applications
There are a lot of ON Semiconductor NCV20061SQ3T2G Instrumentational OP Amps applications.
- Power generator
- Industrial applications including automation
- Exponential operation circuits
- Automotive sensors
- Radiation thermometry transducers
- Signal operation
- Scintillation detectors
- pH (acidity)
- High gain DC amplifier
- Car stereo
